Canon imageRUNNER 2320 Reference Manual page 81

● If you are loading envelopes into the stack bypass:
Flap
❑
Take five envelopes, loosen them as
shown, and then stack them together.
Repeat this step five times for each set of
five envelopes.
❑
Place the envelopes on a clean, level
surface, and press all the way around the
envelopes by hand, in the direction of the
arrows, to remove any curls. Repeat this
step five times for each set of five
envelopes.
IMPORTANT
Take particular care to spread the
envelopes out in the direction that they
will be fed.
❑
Hold down the four corners of the
envelopes firmly, so that they and the
sealed or glued portion stay flat.
NOTE
If the envelopes become filled with air,
flatten them by hand before loading them
into the stack bypass.
Basic Copying
2
2-29