Auto Clear Time - Canon imageRUNNER 2320 Reference Manual
Hide thumbs
Also See for imageRUNNER 2320:
- User manual (120 pages) ,
- Copying manual (116 pages) ,
- Operation manual (40 pages)
Table of Contents
Advertisement
3
Timer Settings
Auto Sleep Time
Auto Clear Time
4
Auto Sleep Time
Off
On
5
Auto Sleep Time
6
Press
Auto Clear Time
If the machine remains idle for a certain period of time (after the last print job or a
key operation is performed), the display returns to the Standby display or the
screen of the selected function. This period of time is called the "Auto Clear Time."
The Auto Clear Time mode can be set from 1 to 9 minutes in one-minute
increments, and can also be set to 'Off'.
NOTE
The default settings are 'On' and '2 min'.
5 min
(3-30)
(Reset) to return to the Standby display.
Use [
] or [
] to select <Auto
Sleep Time> ➞ press [OK].
The Auto Sleep Time menu appears.
Use [
] or [
] to select <Off> or
<On> ➞ press [OK].
If you select <Off> ➞ press [OK], proceed to
step 6.
If you select <On> ➞ press [OK], proceed to
step 5.
Use [
] or [
] to select the
desired time period ➞ press [OK].
You can also enter values using
(numeric keys).
The Auto Sleep Time can be set from 3 to
30 minutes in one minute increments.
The selected mode is set.
Timer Settings
3
-
3-31
Advertisement
Table of Contents
