Download  Print this page

Advertisement

3
Start to copy
100% Auto
Density: Auto
ImgQual.: Text
2-Sided: Off
NOTE
If the message <Dept. ID/Pass Input> appears, enter your Department ID (and
password). (See "Entering the Department ID and Password," on p. 2-10.)
If the message <Enter User ID/Pass> appears, enter your User ID (and password). (See
"Entering a User ID and Password," on p. 2-12.)
The default copy settings are:
- Copy Ratio:
- Paper Selection:
- Copy Density:
- Copy Quantity:
- Image Quality:
The default settings for the Copy function of the machine are already set at the factory,
but you can change them to suit your needs. (See Chapter 3, "Customizing Settings," in
the Copying Guide.)
You can select which functions to display on the Standby display when turning the main
power ON, according to the Additional Functions menu. (See "Initial Function at Power
ON," on p. 3-5.)
The screen on the left is displayed
until the machine is ready to scan.
The screen on the left is displayed when the
1
machine is ready to scan.
IMPORTANT
If you turn OFF the main power, wait at
least 10 seconds before turning the main
power back ON.
Direct (100%)
Auto Paper Selection
Auto Density Control
1
Text
Main Power and Control Panel Power
1
1-15

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: