Terminal Locations, F8-F14 - 12-Pulse - Danfoss vlt fc 300 Instruction Manual

®
VLT Automation Drive FC 300 12-Pulse
How to Install
Instruction Manual High Power

3.2.3 Terminal Locations, F8-F14 - 12-Pulse

The 12-pulse F enclosures have seven different sizes, F8,
F9, F10, F11, F12, F13, and F14. The F8, F10, F12, and F14
consist of an inverter cabinet on the right and rectifier
Terminal locations - Inverter and Rectifier Frame size F8 and F9
239.6 [ 9.43 ]
R2/L12 91-1 S2/L22
160.0 [ 6.30 ]
R1/L11 91 S1/L21 92
56.6 [ 2.23 ]
0.0 [ 0.00 ]
Figure 3.11 Terminal locations - Inverter and Rectifier Cabinet - F8 and F9 (front, left and right side view). The connector plate is 1.65 in
[42 mm] below .0 level.
1) Ground bar
MG34Q222 - VLT ® is a registered Danfoss trademark
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20872-Danfoss-131H4490-VLT-Automation-VT-Drive-VFD-FC302-460V-25-HP.aspx
cabinet on the left. The F9, F11 and F13 have an additional
options cabinet left of the rectifier cabinet. The F9 is an F8
with an additional options cabinet. The F11 is an F10 with
an additional options cabinet. The F13 is an F12 with an
additional options cabinet.
U/T1 96 V/T2 97 W/T3 98
92-1 T2/L32 93-1 1
T1/L31 93
3 3
3-9