Modifying Targeted Session Parameters - Alcatel-Lucent 7450 Manual

Modifying Targeted Session Parameters

The modification of LDP targeted session parameters does not take effect until the next time the
session goes down and is re-establishes. Individual parameters cannot be deleted. The
a targeted-session parameter command reverts modified values back to the default. Different
default parameters can be configured for IPv4 and IPv6 LDP targeted hello adjacencies.
The following example displays the command syntax usage to revert targeted session parameters
back to the default values:
Example:
config>router# ldp
config>router>ldp# targeted-session
config>router>ldp>tcp-session-parameters>peer# no authentication-key
config>router>ldp>targ-session# no disable-targeted-session
config>router>ldp>targ-session>ipv4# no hello
config>router>ldp>targ-session>ipv4# no keepalive
config>router>ldp>targ-session# no peer 10.10.10.104
The following output displays the default values:
A:ALA-1>config>router>ldp>targeted# info detail
----------------------------------------------
----------------------------------------------
A:ALA-1>config>router>ldp>targeted#
7450 ESS MPLS Guide
no disable-targeted-session
no import-prefixes
no export-prefixes
ipv4
no hello
no keepalive
no hello-reduction
exit
ipv6
no hello
no keepalive
no hello-reduction
exit
Label Distribution Protocol
no
Page 635
form of