Alcatel-Lucent 7450 Manual page 310

dynamic — Displays dynamically assigned labels for bypass protection.
manual — Displays manually assigned labels for bypass protection.
detail — Displays detailed information.
p2mp — Displays P2MP bypass tunnel information.
Output MPLS Bypass Tunnel Output Fields — The following table describes MPLS bypass tunnel out-
put fields.
To
State
Out I/F
Out Label
Reserved BW (Kbps)
Sample Output
*A:Dut-B# show router mpls bypass-tunnel detail
=======================================================================
MPLS Bypass Tunnels (Detail)
=======================================================================
-----------------------------------------------------------------------
bypass-node10.20.1.4
-----------------------------------------------------------------------
To
Out I/F
Up Time
Reserved BW
Type
Setup Priority
Class Type
Exclude Node
Computed Hops
-> 10.10.8.6(SA)
-> 10.20.1.7(L)
Actual Hops
-> 10.10.8.6(10.20.1.6)
-> 10.20.1.7(10.20.1.7)
-> 10.10.22.7
=======================================================================
*A:Dut-A>config>router>mpls>lsp$ /show router mpls bypass-tunnel detail
=======================================================================
MPLS Bypass Tunnels (Detail)
Page 310
Label
The system IP address of the egress router.
The LSP's administrative state.
Specifies the name of the network IP interface.
Specifies the incoming MPLS label on which to match.
Specifies the amount of bandwidth in megabits per second (Mbps)
reserved for the LSP.
: 10.20.1.7
: 1/1/4
: 0d 01:17:22
: 0 Kbps
: Dynamic
: 7
: 0
: 10.20.1.4
:
10.10.8.2(S)
:
10.10.8.2(10.20.1.2)
Description
State
Out Label
Active Time
Protected LSP Count : 1
Hold Priority
Inter-Area
Egress Admin Groups : None
Egress Admin Groups : None
Egress Admin Groups : None
Record Label
Record Label : 131071
Record Label : 131068
Record Label : 131068
7450 ESS MPLS Guide
: Up
: 131071
: n/a
: 0
: True
: N/A