Show Commands - Alcatel-Lucent 7450 Manual

Show Commands

auto-lsp
Syntax auto-lsp [lsp-name] auto-bandwidth
auto-lsp [lsp-name] [status {up|down}] [detail] [to ip-address]
auto-lsp [lsp-name] [status {up|down}] {mesh-p2p | one-hop-p2p} [detail] [to ip-address]
Context show>router>mpls
Parameters
lsp-name — Specifies the LSP name.
up|down — Specifies the state.
mesh-p2p|one-hop-p2p — Specifies the auto LSP type.
Sample Output
*A:Dut-C# show router mpls auto-lsp
========================================================================
MPLS Auto-LSP Template
========================================================================
LSP Name
------------------------------------------------------------------------
meshP2pLsp3-10.20.1.6-61441
meshP2pLsp2-10.20.1.1-61442
meshP2pLsp2-10.20.1.2-61443
meshP2pLsp2-10.20.1.4-61444
meshP2pLsp2-10.20.1.5-61445
meshP2pLsp2-10.20.1.6-61446
meshP2pLsp10-10.20.1.1-61447
meshP2pLsp10-10.20.1.2-61448
bypass-tunnel
Syntax bypass-tunnel [to ip-address] [protected-lsp [lsp-name]] [dynamic | manual | p2mp]
[detail]
Context show>router>mpls
Description
If fast reroute is enabled on an LSP and the facility method is selected, instead of creating a separate
LSP for every LSP that is to be backed up, a single LSP is created which serves as a backup for a set
of LSPs. Such an LSP tunnel is called a bypass tunnel.
Parameters ip-address — Specify the IP address of the egress router.
lsp-name — Specify the name of the LSP protected by the bypass tunnel.
7450 ESS MPLS Guide
Values 80 characters max
Type Fastfail
Config
MeshP2P Yes
MeshP2P Yes
MeshP2P Yes
MeshP2P Yes
MeshP2P Yes
MeshP2P Yes
MeshP2P Yes
MeshP2P Yes
MPLS and RSVP
Admin Oper
State State
Up Up
Up Up
Up Up
Up Up
Up Up
Up Up
Up Up
Up Up
Page 309