Configuring Rsvp Parameters - Alcatel-Lucent 7450 Manual

Configuring RSVP Parameters

RSVP is used to set up LSPs. RSVP must be enabled on the router interfaces that are
participating in signaled LSPs. The keep-multiplier and refresh-time default values can be
modified in the RSVP context.
Initially, interfaces are configured in the config>router>mpls>interface context. Only these
existing (MPLS) interfaces are available to modify in the config>router> rsvp context.
Interfaces cannot be directly added in the RSVP context.
The following example displays an RSVP configuration example:
rsvp config
A:ALA-1>config>router>rsvp# info
----------------------------------------------
----------------------------------------------
A:ALA-1>config>router>rsvp#
7450 ESS MPLS Guide
interface "system"
no shutdown
exit
interface to-104
hello-interval 4000
no shutdown
exit
no shutdown
MPLS and RSVP
Page 183