Alcatel-Lucent 7450 Manual page 243

dest-global-id — Specifies the destination global ID. If the destination global ID is not entered, then it
dest-node-id — Specifies the destination node ID.
dest-tunnel-num — Specifies the destination tunnel number. If the destination tunnel number is not
forward-path
Syntax [no] forward-path
Context config>router>mpls>mpls-tp>transit-path
Description This command enables the forward path of an MPLS-TP transit path to be created or edited.
The forward path must be created before the reverse path.
The no form of this command removes the forward path. The forward path cannot be removed if a
reverse exists.
Default
no forward-path
reverse-path
Syntax [no] reverse-path
Context config>router>mpls>mpls-tp>transit-path
Description This command enables the reverse path of an MPLS-TP reverse path to be created or edited.
The reverse path must be created after the forward path.
The no form of this command removes the reverse path. The reverse path must be removed before the
forward path.
Default
no reverse-path
7450 ESS MPLS Guide
is set to the same value as the source global ID.
Values
0 — 4294967295
Values a.b.c.d or 1 — 4294967295
entered, then it is set to the same value as the source tunnel number.
Values
1 — 61440
MPLS and RSVP
Page 243