Deleting An Mpls Interface - Alcatel-Lucent 7450 Manual

Deleting an MPLS Interface

Deleting an MPLS Interface
In order to delete an interface from the MPLS configuration, the interface must be shut down
first.
Use the following CLI syntax to delete an interface from the MPLS configuration:
CLI Syntax: mpls
ALA-1>config>router>if-attr# info
----------------------------------------------
----------------------------------------------
A:ALA-1>config>router>mpls# info
----------------------------------------------
...
----------------------------------------------
A:ALA-1>config>router>mpls#
Page 190
[no] interface ip-int-name
shutdown
admin-group "green" value 15
admin-group "yellow" value 20
admin-group "red" value 25
interface "system"
exit
no shutdown
7450 ESS MPLS Guide