Show Rsvp Commands - Alcatel-Lucent 7450 Manual

Show RSVP Commands

interface
Syntax interface [ip-int-name | ip-address] statistics[detail]
Context show>router>rsvp
Description This command shows RSVP interfaces.
ip-int-name — The name of the network IP interface. An interface name cannot be in the form of an
ip-address — The system or network interface IP address.
statistics — Displays the RSVP interface name and counts of various RSVP packets sent and
detail — Displays detailed information.
Output RSVP Interface Output — The following table describes RSVP interface output fields.
Interface
Total Sessions
Active Sessions
Total BW (Mbps)
Resv BW (Mbps)
Adm
Bfd
Opr
Port ID
7450 ESS MPLS Guide
IP address. If the string contains special characters (#, $, spaces, etc.), the entire string must be
enclosed within double quotes.
received on the interface.
Label
The name of the IP interface.
The total number of RSVP sessions on this interface. This count
includes sessions that are active as well as sessions that have been sig-
naled but a response has not yet been received.
The total number of active RSVP sessions on this interface.
The amount of bandwidth in megabits per second (Mbps) available to
be reserved for the RSVP protocol on the interface.
The amount of bandwidth in mega-bits per seconds (Mbps) reserved
on this interface. A value of zero (0) indicates that no bandwidth is
reserved.
Down — The RSVP interface is administratively disabled.
Up — The RSVP interface is administratively enabled.
Yes — BFD is enabled on the RSVP interface.
No — BFD is disabled on the RSVP interface.
Down — The RSVP interface is operationally down.
Up — The RSVP interface is operationally up.
Specifies the physical port bound to the interface.
MPLS and RSVP
Description
Page 379