Alcatel-Lucent 7450 Manual page 307

MPLS and RSVP
te-down-threshold
Syntax te-down-threshold threshold-level [threshold-level...(up to 16 max)]
no te-down-threshold
Context config>router>rsvp
config>router>rsvp>interface
Description This command configures the specific threshold levels per node and per interface. Threshold levels
are for reserved bandwidth per interface. The te-threshold-update command is used to enable or
disable threshold-based IGP TE updates. Any reserved bandwidth change per interface is compared
with all the threshold levels and trigger an IGP TE update if a defined threshold level is crossed in
either direction (LSP setup or teardown). Threshold-based updates is supported with both ISIS and
OSPF. A minimum of one and a maximum of 16 threshold levels is supported.
Threshold levels configured per node is inherited by all configured RSVP interfaces. Threshold levels
defined under the RSVP interface must be used to trigger IGP updates if non-default threshold levels
are configured.
The no form of this command resets the default value.
Default 100 99 98 97 96 95 90 85 80 75 60 45 30 15 0
Parameters
threshold-level — Integer value
Values 0 — 100
7450 ESS MPLS Guide Page 307