Mpls-Tp Commands - Alcatel-Lucent 7450 Manual

Command Hierarchies

MPLS-TP Commands

config
Page 196
— router
— [no] mpls
— [no] mpls-tp
— global-id global-id
— no global-id
— node-id node-id
— no node-id
— [no] oam-template name
— hold-time-down
— no hold-time-down
— hold-time-up
— no hold-time-up
— bfd-template
— no bfd-template
— protection-template name
— no protection-template
— [no] revertive
— wait-to-restore
— no wait-to-restore
— rapid-psc-timer
— no rapid-psc-timer
— slow-psc-timer
— no slow-psc-timer
— [no] shutdown
— tp-tunnel-id-range start-id end-id
— no tp-tunnel-id-range
— transit-path path-name
— no transit-path
— [no] forward-path
— in-label in-label out-label out-label out-link if-name [next-hop
next-hop]
— no in-label
— [no] mep
— dsmap
— no
— path-id {lsp-num lsp-num | working-path | protect-path [src-
global-id src-global-id] src-node-id src-node-id src-tunnel-
num src-tunnel-num [dest-global-id dest-global-id] dest-node-
id dest-node-id [dest-tunnel-num dest-tunnel-num]}
— no path-id
— [no] reverse-path
— [no] shutdown
timer
timer
name
interval
interval
interval
if-num
dsmap
7450 ESS MPLS Guide