Alcatel-Lucent 7450 Manual page 313

interface
Syntax interface [ip-int-name | ip-address] [label-map label]
interface [ip-int-name | ip-address] statistics
Context show>router>mpls
Description
This command displays MPLS interface information.
Parameters ip-int-name — The name of the network IP interface. An interface name cannot be in the form of an
IP address. If the string contains special characters (#, $, spaces, etc.), the entire string must be
enclosed within double quotes.
ip-address — The system or network interface IP address.
label-map label — The MPLS label on which to match.
statistics — Displays MPLS interface name and the number of packets and octets sent and received
Output MPLS Interface Output Fields — The following table describes MPLS interface output fields.
Interface
Port-id
Adm
Opr
Te-metric
Srlg Groups
Interfaces
Transmitted
Received
In Label
In I/F
Out Label
Out I/F
Next Hop
Type
*A:SRU4>config>router>mpls# show router mpls interface
===============================================================================
7450 ESS MPLS Guide
Values
32 — 1048575
on an MPLS interface.
Label
The interface name.
The port ID displayed in the slot/mda/port format.
Specifies the administrative state of the interface.
Specifies the operational state of the interface.
Specifies the traffic engineering metric used on the interface.
Specifies the shared risk loss group (SRLG) name(s).
The total number of interfaces.
Displays the number of packets and octets transmitted from the inter-
face.
Displays the number of packets and octets received.
Specifies the ingress label.
Specifies the ingress interface.
Specifies the egress label.
Specifies the egress interface.
Specifies the next hop IP address for the static LSP.
Specifies whether the label value is statically or dynamically assigned.
MPLS and RSVP
Description
Page 313