Modifying Rsvp Message Pacing Parameters; Deleting An Interface From Rsvp - Alcatel-Lucent 7450 Manual

Modifying RSVP Message Pacing Parameters

Modifying RSVP Message Pacing Parameters
RSVP message pacing maintains a count of the messages that were dropped because the
output queue for the egress interface was full.
The following example displays command usage to modify RSVP parameters:
The following example displays a modified RSVP message pacing configuration example.
Refer to the RSVP message pacing configuration on
A:ALA-1>config>router>rsvp# info
----------------------------------------------
----------------------------------------------
A:ALA-1>config>router>rsvp#

Deleting an Interface from RSVP

Interfaces cannot be deleted directly from the RSVP configuration. An interface must have
been configured in the MPLS context, which enables it automatically in the RSVP context.
The interface must first be deleted from the MPLS context. This removes the association from
RSVP.
See
Page 192
keep-multiplier 5
refresh-time 60
msg-pacing
period 200
max-burst 200
exit
interface "system"
exit
interface "to-104"
exit
no shutdown
Deleting an MPLS Interface on page 190
page 183.
for information on deleting an MPLS interface.
7450 ESS MPLS Guide