Alcatel-Lucent 7450 Manual page 417

Parameters
lsp lsp-name — Name that identifies the LSP. The LSP name can be up to 32 characters long and
sender source-address — The system IP address of the sender.
endpoint endpoint-address — The far-end system IP address.
tunnel-id tunnel-id — The RSVP tunnel ID.
lsp-id lsp-id — The LSP ID.
interface ip-int-name — The interface name. The interface name can be up to 32 characters long and
nbr
Syntax nbr [detail]
no nbr
Context debug>router>rsvp>event
Description This command debugs neighbor events.
The no form of the command disables the debugging.
Parameters detail — Displays detailed information about neighbor events.
path
Syntax path [detail]
no path
Context debug>router>rsvp>event
Description This command debugs path-related events.
The no form of the command disables the debugging.
Parameters detail — Displays detailed information about path-related events.
resv
Syntax resv [detail]
no resv
Context debug>router>rsvp>event
Description This command debugs RSVP reservation events.
7450 ESS MPLS Guide
must be unique.
Values 0 — 4294967295
Values 1 — 65535
must be unique. If the string contains special characters (#, $, spaces, etc.), the entire string must
be enclosed within double quotes.
MPLS and RSVP
Page 417