Mpls-Tp Show Commands; Static Mpls Labels; Mpls-Tp Tunnel Configuration - Alcatel-Lucent 7450 Manual

MPLS-TP Show Commands

MPLS-TP Show Commands

Static MPLS Labels

The following new commands show the details of the static MPLS labels.
show>router>mpls-labels>label <start-label> [<end-label> [in-use|<label-owner>]]
show>router>mpls-labels>label-range
An example output is as follows:
*A:mlstp-dutA# show router mpls
mpls
*A:mlstp-dutA# show router mpls label
label
*A:7950 XRS-20# show router mpls-labels label-range
=======================================================================
Label Ranges
=======================================================================
Label Type
-----------------------------------------------------------------------
Static
Dynamic
Seg-Route
=======================================================================

MPLS-TP Tunnel Configuration

These should show the configuration of a given tunnel.
show>router>mpls>tp-lsp
A sample output is as follows:
*A:mlstp-dutA# show router mpls tp-lsp
- tp-lsp [<lsp-name>] [status {up|down}] [from <ip-address>|to <ip-address>]
[detail]
- tp-lsp [<lsp-name>] path [protect|working] [detail]
- tp-lsp [<lsp-name>] protection
<lsp-name>
<path>
<protection>
<up|down>
<ip-address>
<detail>
*A:mlstp-dutA# show router mpls tp-lsp
path
protection
Page 94
mpls-labels
label-range
Start Label End Label
32 18431
18432 524287
0 0
: [32 chars max] - accepts * as wildcard char
: keyword - Display LSP path information.
: keyword - Display LSP protection information.
: keywords - Specify state of the LSP
: a.b.c.d
: keyword - Display detailed information.
Aging Available
- 18400
0 505856
- 0
7450 ESS MPLS Guide
Total
18400
505856
505856