Alcatel-Lucent 7450 Manual page 492

Retry Limit
Sample Output
A:ALA-1# show router lmp peer 16843009
================================================================================
LMP Peer 1.1.1.1 (16843009)
================================================================================
Admin State:
Retrans Intvl
================================================================================
A:ALA-1#
control-channel
Syntax control-channel lmp-cc-id [detail]
Context show>router>lmp>peer
Description This command displays LMP control channel information for a specific peer.
Parameters lmp-cc-id — Specifies the unsigned integer identifier for the control channel
detail — Keyword to display more detailed output.
Output Control Channel Output Fields — The following table describes control channel output fields.
Admin State
Oper State
Remote Id
Setup Role
Hello Interval
Hello Dead Intv
Peer If Addr
Inbound Errors
Outbound Errors
Message Type
Page 492
Label
The configured number of times LMP resends a message before
restarting the process.
: Out of Service
: 5000 ms
Values
1 — 42949672
Label
The administrative state of the control channel.
The operational state of the control channel.
The remote ID of the control channel.
The setup role of the control channel.
The interval at which LMP hello packets are sent on the control
channel.
The interval after which the IPCC is declared down if no hello packets
are received from the LMP peer.
The LMP peer interface address.
The total number of inbound packet errors.
The total number of outbound packet errors.
The types of message packets sent and received on the control channel.
Description (Continued)
Oper State : Down
Retry Limit : 6
Description
7450 ESS MPLS Guide