Mpls Configuration Commands - Alcatel-Lucent 7450 Manual

MPLS Configuration Commands

Generic Commands
shutdown
Syntax [no] shutdown
Context config>router>mpls
config>router>mpls>interface
config>router>mpls>lsp>primary
config>router>mpls>lsp>secondary
Description This command administratively disables an entity. When disabled, an entity does not change, reset, or
remove any configuration settings or statistics.
MPLS is not enabled by default and must be explicitely enabled (no shutdown).
The operational state of the entity is disabled as well as the operational state of any entities contained
within. Many objects must be shut down before they may be deleted.
The no form of this command places the entity into an administratively enabled state.
Default
no shutdown
7450 ESS MPLS Guide
MPLS and RSVP
Page 207