Alcatel-Lucent 7450 Manual page 764

Show Commands
10.0.10.23
10.0.10.25
10.0.10.27
10.0.10.29
10.0.10.31
10.0.10.33
10.0.10.35
10.0.10.37
10.0.10.39
10.0.10.41
10.0.10.43
10.0.10.45
10.0.10.47
10.0.10.49
-------------------------------------------------------------------------------
Peer Template templ3
-------------------------------------------------------------------------------
30.1.3.5
30.1.3.7
30.1.3.9
30.1.3.11
30.1.3.13
===============================================================================
session-parameters
Syntax session-parameters [family]
session-parameters peer-ip-address
Context show>router>ldp
Description This command displays LDP peer information.
Parameters
peer-ip-address — Specify the peer IP address.
family — Displays either IPv4 or IPv6 active LDP information.
LDP session-parameters output — The following table describes LDP session-parameters
output.
Page 764
Label
Peer
TTL security
Min-TTL-Value
Auth
10.0.10.24
10.0.10.26
10.0.10.28
10.0.10.30
10.0.10.32
10.0.10.34
10.0.10.36
10.0.10.38
10.0.10.40
10.0.10.42
10.0.10.44
10.0.10.46
10.0.10.48
10.0.10.50
30.1.3.6
30.1.3.8
30.1.3.10
30.1.3.12
30.1.3.14
The IP address of the peer.
Enabled — LDP peering sessions protected.
Disabled — LDP peering sessions unprotected.
Displays the minimum TTL value for an incoming packet.
Enabled — Authentication using MD5 message based digest proto-
col is enabled.
Disabled — No authentication is used.
Description
7450 ESS MPLS Guide