Figure 24: Rdm With Two Class Types; Figure 25: First Lsp Reservation - Alcatel-Lucent 7450 Manual

Ethernet service switch

Hide thumbs Also See for 7450:

Table of Contents

Example CT Bandwidth Sharing with RDM

Below is a simple example with two CT values (CT0, CT1) and one priority 0 as shown in

Suppose CT1 bandwidth, or the CT1 percentage of Maximum Reservable Bandwidth to be more

accurate is 100 Mbps and CT2 bandwidth is 100 Mbps and link bandwidth is 200 Mbps. BC

constraints can be calculated as follows.

BC1 = CT1 Bandwidth = 100 Mbps.

BC0 = {CT1 Bandwidth} + {CT0 Bandwidth} = 200 Mbps.

Suppose an LSP comes with CT1, setup and holding priorities of 0 and a bandwidth of 50 Mbps.

7450 ESS MPLS Guide

Figure 24: RDM with Two Class Types

50 MB, Reserved

MPLS and RSVP