Alcatel-Lucent 7450 Manual page 403

hold-priority val — Specifies the hold priority value to use when insufficient bandwidth is available
resignal
Syntax resignal {lsp lsp-name path path-name | delay minutes}
resignal {p2mp-lsp p2mp-lsp-name p2mp-instance p2mp-instance-name | p2mp-delay
p2mp-minutes}
Context tools>perform>router>mpls
Description This command resignals a specific LSP path. The minutes parameter configures the global timer or all
LSPs for resignal. If only lsp-name and path-name are provided, the LSP will be resignaled immedi-
ately.
Parameters lsp-name — Specifies an existing LSP name to resignal.
path-name — Specifies an existing path name to resignal.
delay minutes — Configures the global timer or all LSPs to resignal.
p2mp-lsp p2mp-lsp-name — Specifies an existing point-to-multipoint LSP name.
p2mp-instance p2mp-instance-name — Specifies a name that identifies the P2MP LSP instance
p2mp-delay p2mp-minutes — Specifies the delay time, in minutes.
resignal-bypass
Syntax resignal-bypass {lsp bypass-lsp-name [force] | delay minutes}
Context tools>perform>router>mpls
Description This command performs a manual re-optimization of a specific dynamic or manual bypass LSP, or of
all dynamic bypass LSPs.
The name of a manual bypass LSP is the one provided by the user at configuration time. The name of
a dynamic bypass LSP is shown in the output of "show>router>mpls>bypass-tunnel dynamic
detail".
The delay option triggers the global re-optimization of all dynamic bypass LSPs at the expiry of the
specified delay. In essence, this option forces the global bypass resignal timer to expire after an
amount of time equal to the value of the delay parameter. This option has no affect on a manual
bypass LSP.
However, when a specific bypass LSP name is specified, the named dynamic or manual bypass LSP
is not signaled and the associations are not evaluated even if the new bypass LSP path has the same
cost as the current one. This is a different behavior from that of the similar command for the primary
or secondary path of an LSP as a bypass LSP can have a large number of PSB associations.
7450 ESS MPLS Guide
to setup an LSP.
Values
0 — 7
Values 0 — 60
MPLS and RSVP
Page 403