Meaning Of Leds On The Sensor Module Cabinet 10 / 20 (Smc10 / Smc20) - Siemens SINAMICS S120 Manual

Supplementary System Components and Encoder System Integration
7.3 Sensor Module Cabinet-Mounted SMC10
7.3.3.5

Meaning of LEDs on the Sensor Module Cabinet 10 / 20 (SMC10 / SMC20)

Table 7-11 Sensor Module Cabinet 10 / 20 (SMC10 / SMC20) – description of the LEDs
LED Color
RDY - off
READY
Green Continuous
Orange Continuous
Red Continuous
Green/ Flashing
0.5 Hz
red
Flashing
2 Hz
Green/ Flashing
orange light
or
Red/
orange
Cause and rectification of faults
The following reference contains further information about the cause and rectification of
faults:
Reference: /IH1/ SINAMICS Commissioning Manual.
242
Status
Electronics power supply is missing or outside permissible
tolerance range.
The component is ready for operation and cyclic DRIVE-
CLiQ communication is taking place.
DRIVE-CLiQ communication is being established.
At least one fault is present in this component.
Note:
LED is driven irrespective of the corresponding messages
being reconfigured.
Firmware is being downloaded.
Firmware download is complete. Wait for POWER ON
Component recognition via LED is activated (p0144)
Note:
Both options depend on the LED status when component
recognition is activated via p0144 = 1.
Description, cause
Manual, (GH6), 07/2007 Edition, 6SL3097-2AL00-0BP2
Remedy
–
–
–
Remedy and
acknowledge fault
–
Carry out a POWER
ON
–
AC Drive