Individual Channel Assignment Method; Clearing Ds0 Channel Allocation - Paradyne 3163 User Manual

Individual Channel Assignment Method

The Assign By configuration option screen appears
after you select a port.
"
Procedure
To assign by the individual channel method:
1. Press the key once to bring the Chan selection
onto the screen.
Assign By:Block
Next
F1
2. Press F3 (Chan).
Assign By:Chan
Block
F1
3. Press F1 (Next) to display the next configuration
option (channel allocation).
4. Line 1 displays the 24 channels for the network
interface. Line 2 displays what is allocated to the
DS0 channel shown in Line 1. Pressing the
key scrolls the channels onto the screen in
groups of three. Select the channel by pressing the
Function key under the desired number. Portn
appears. The port is assigned to that channel. To
deallocate a port, press the Function key under
that port number. Pressing the Function key under
channels assigned to other ports has no effect.
Next
F1
3163-A2-GB20-10
Block ACAMI
F2 F3
ACAMI Chan
F2 F3
or
N1 N2
Prt1 Prt1
F2 F3

Clearing DS0 Channel Allocation

You can clear (deallocate) all the DS0 channels
currently allocated to either the network interface or the
synchronous data port.
"
Procedure
To clear DS0 channel allocation:
1. From the top-level menu screen, select Cnfig.
2. Select the configuration option set to be copied
into the Edit area by using the appropriate
Function key. Use the scroll keys, if necessary.
3. Select Edit.
4. From the Edit screen, press the
Chan selection appears on the screen.
5. Select Chan.
6. From the Channel Config screen, select Clear.
March 1999
key until the
Edit:
Port NET Chan
F3
F1 F2
Channel Config:
Dsply Clear Prt1
F3
F1 F2
Operation
3-19