Clearing Ds0 Channel Allocation - Paradyne 3160 Operator's Manual

Operation

Clearing DS0 Channel Allocation

"
3-44
2. From the DTE Channels screen, press F2 to select Voice.
DTE Channels:
Assign Voice
F1
3. Line 1 displays the 24 DS0 channels for the DTE Drop/Insert (DSX-1)
interface. Pressing the
groups of three. Line 2 displays whether the DS0 channel in Line 1 is a data
channel (Data) or a voice (RBS) channel. Each time that you press the
Function key located below the desired channel, the display in Line 2 toggles
between Data and RBS.
D1 D2
RBS RBS
F1
You can clear (deallocate) all the DS0 channels currently allocated to either the
network interface, the DTE Drop/Insert (DSX-1) interface, or the synchronous
data ports.
Procedure
To clear DS0 channel allocation:
1. From the top-level menu screen, select Cnfig.
2. Select the configuration option set to be copied into the Edit area by using the
appropriate Function key. Use the scroll keys, if necessary.
3. Select Edit.
4. From the Edit screen, press the
the screen.
5. Select Chan.
Edit:
Port NET
F1
March 1999
F2 F3
or key scrolls the channels onto the screen in
D3
RBS
F2 F3
key until the Chan selection appears on
Chan
F3
F2
3160-A2-GB21-80