Displaying Ds0 Channel Assignments - Paradyne 3163 User Manual

ACCULINK 3163 DSU/CSU

Displaying DS0 Channel Assignments

Use the Display command (in the Channel
Configuration branch) to view how the DS0 channels are
currently allocated.
Line 1 of the display shows the 24 channels of the
selected interface. Pressing the
channels onto the screen in groups of three. Line 2
displays what is allocated to the DS0 channel listed in
Line 1. Symbols used in the display are shown in
Table 3-4.
Table 3-4
Display Channel Symbols
Symbol
– The DS0 channel is not allocated.
Prt1 The DS0 channel is allocated to Port 1.
N n The DS0 channel is allocated to the
network interface DS0 channel n , where
n can be any number from 1 through 24.
"
Procedure
To display the DS0 channel allocation:
1. From the top-level menu screen, select Cnfig.
2. Select the configuration option set to be copied
into the Edit area by using the appropriate
Function key. Use the scroll keys, if necessary.
3. Select Edit.
4. From the Edit screen, press the
Chan selection appears on the screen.
5. Select Chan.
Edit:
Port
F1
3-16
or key scrolls the
Meaning
key until the
NET Chan
F3
F2
6. From the Channel Config screen, select Dsply.
7. From the Display Chan screen, select NET to
display the channels allocated to the network
interface.
8. If you selected NET the channels allocated to the
network interface are displayed. Line 1 displays
the 24 channels for the network interface, while
Line 2 displays what is allocated to the DS0
channel shown in Line 1. Pressing the
key scrolls the channels onto the screen in groups
of three.
March 1999
Channel Config:
Dsply Clear Prt1
F3
F1 F2
Display Chan:
NET Ports
F1 F2 F3
N1 N2 N3
Prt1 Prt1 Prt1
F3
F1 F2
3163-A2-GB20-10
or