Paradyne 3160 Operator's Manual page 53

"
Configuring the DSU/CSU for SNMP or Telnet
Access
3160-A2-GB21-80
Procedure
To copy the configuration options to one or all ports:
1. From the Port Select screen, select Copy.
Port Select:
Copy Prt1
F1
2. Select the port from which you want to copy the configuration options using
the corresponding Function key.
Copy From:
Prt1 Prt2
F1
3. Select the port to which you want to copy the configuration options using the
corresponding Function key. Or, press F1 (All) to choose to copy to all ports.
Copy To:
All Prt1
F1
To configure the DSU/CSU for SNMP or Telnet access:
H
Enable the SNMP agent or Telnet server within the DSU/CSU (see
Configuration Options
Appendix C,
H
Select and configure the port that provides the link to the SNMP or Telnet
system.
H
Set the Internet Protocol (IP) address and subnet mask needed to access the
DSU/CSU (see Appendix F,
H
Select the link layer protocol (PPP or SLIP) for the port that provides the link
to the SNMP or Telnet system.
H
For SNMP links, specify the two community names (and their access levels)
that are allowed to access the device's Management Information Base (MIB).
March 1999
Prt2
F2 F3
Prt3
F3
F2
Prt2
F2 F3
).
IP Network Addressing Scenarios
Operation
).
3-19