Paradyne 3160 Operator's Manual page 242

SNMP MIB Objects
Table E-1. SNMP MIB to Front Panel Command Cross-Reference (2 of 4)
Front Panel Command
Stat–>Tstat:
LLB Test Active
PLB Test Active
RLB Test Active
DLB Test Active
DCLB on Port n
DTLB on Port n
1–8 Test Active
QRSS Test Active
QRSS on Port n
511 on Port n
Monitoring QRSS
Mon QRSS, Port n
Mon511, Port n
Stat–>LED–>Prtn:
DTR
CTS
RTS
Stat–>ID:
Ser
Mod
SRev
HRevCCA1
HRevCCA2
Test–>Rlpbk–>LLBUP
Test–>Rlpbk–>LLBDN
Test–>Rlpbk–>54UP–>Prt n
Test–>Rlpbk–>54DN–>Prt n
Test–>Rlpbk–>FT1UP–>Prt n
Test–>Rlpbk–>FT1DN–>Prt n
Test–>Lpbk–>LLB
Test–>Lpbk–>Abort–>LLB
Test–>Lpbk–>PLB
Test–>Lpbk–>Abort–>PLB
E-30
SNMP MIB Object
Read:
dsx1LineLoop from dsx1LoopbackConfig for Net T1
dsx1PayloadLoop from dsx1LoopbackConfig for Net
T1
dsx1PayloadLoop from dsx1LoopbackConfig for DTE
T1
dsx1LineLoop from dsx1LoopbackConfig for DTE T1
testFullDuplexLoopback from IfExtnsTestType for Port
n
testLoopDTLB from IfExtnsTestType for Port n
dsx1SendOtherTestPattern from dsx1SendCode for
Net T1
dsx1SendQRS from dsx1SendCode for Net T1
testSendQRSS from IfExtnsTestType for Port n
testSend511 from IfExtnsTestType for Port n
testMonQRSS from ifExtnsTestType for Net T1
testMonQRSS from ifExtnsTestType for Port n
testMon511 from ifExtnsTestType for Port n
Read:
rs232InSigState from rs232InSigName == dtr
rs232outSigState from rs232OutSigName == ctr
rs232InSigState from rs232InSigName == rts
Read the sysDescr object from the System Group
Set dsx1SendCode to dsx1SendLineCode
Set dsx1SendCode to dsx1SendResetCode
Set IfExtnsTestType for port n to testSendV54Up
Set IfExtnsTestType for port n to testSendV54Down
Set IfExtnsTestType for port n to testSendFT1UP
Set IfExtnsTestType for port n to testSendFT1Down
Set dsx1LoopbackConfig for Net T1 to dsx1LineLoop
Set dsx1LoopbackConfig for Net T1 to dsx1NoLoop
Set dsx1LoopbackConfig for Net T1 to
dsx1PayloadLoop
Set dsx1LoopbackConfig for Net T1 to dsx1NoLoop
March 1999 3160-A2-GB21-80