Paradyne 3160 Operator's Manual page 163

3160-A2-GB21-80
Table C-7. User Interface Configuration Options (2 of 10)
Password: None
Next None Com Modem
Password Mode. Activates a password prompt that prevents access until a password is
entered.
None – Does not require a password.
Com – Prompts the communications port user to enter a password.
Modem – Prompts the remote modem port user to enter a password. This selection is
available on standalone DSU/CSUs only.
Both – Prompts both the communications port user and the remote modem port user to
enter a password. This selection is available on standalone DSU/CSUs only.
Com Port: Disab
Next Enab Disab Prev
Setting the Carrier Communication Port. Enables the use of the communication port in
carrier-mounted DSU/CSUs.
Enab – This communication port is enabled.
Disab – The communication port is disabled.
NOTE: This configuration option is available on carrier-mounted DSU/CSUs
Y
only.
Com Use: ASCII
Next Mgmt ASCII Daisy
Communication Port Use. Specifies how the communication port is used.
Mgmt – Configures the communication port as the link to an SNMP or Telnet system.
ASCII – Configures the communication port as a proprietary ASCII port supporting Front
Panel Emulation software and ASCII alarm messages. Only one ASCII communication
port is allowed per 3000 Series carrier.
Daisy – Configures the communication port as an SNMP or Telnet port that is daisy
chained to the auxiliary port of an another 31xx Series device. This selection is available
on standalone DSU/CSUs only.
Term – Configures the communication port as the interface to an async terminal.
March 1999
Both Prev
Term Prev
Configuration Options
C-19