Pin Assignments; H Overview; H T1 Network Interface - Paradyne 3160 Operator's Manual

Pin Assignments

Overview
T1 Network Interface
3160-A2-GB21-80
The DSU/CSU is shipped with a power module and a VF cable. Various other
interconnecting cables are available. For cable feature numbers, refer to
Appendix I, Equipment List
and cables.
The T1 network interface connector is an RJ48C, 8-position, unkeyed modular
jack (Table D-1).
The T1 line interface cable is a 20-foot, 24 AWG solid, 2-twisted pair cable that is
either RJ48C-to-RJ48C
Table D-1. T1 Network Interface Connector
Signal
Receive Ring
Receive Tip
Transmit Ring
Transmit Tip
March 1999
. This appendix describes connector pin assignments
(Figure D-1) or RJ48C-to-DA15P
Pin Number
1
2
4
5
D
(Figure D-2).
D-1