Releasing The Active User Interface - Paradyne 3160 Operator's Manual

Releasing the Active User Interface

"
3160-A2-GB21-80
To release the current active user interface, either allow five minutes to elapse
without pressing any key or use the Release command.
Procedure
To use the Release command:
1. From the top-level menu screen, press the
appears on the screen.
2. Select Ctrl.
3. From the Control screen, select Rel (Release).
Control:
Call Rel
F1
The active user interface is released. The message Released appears. No
user interface is active until input is received from a user interface.
March 1999
LED
F2 F3
Operation
key until the Ctrl selection
3-53