Aborting Loopbacks - Paradyne 3160 Operator's Manual

Aborting Loopbacks

"
3160-A2-GB21-80
4. Select DTLB.
Loopback:
RLB DCLB
F1
5. From the DTLB screen, press the Function key for the port for which you
want to perform the data terminal loopback. Use the scroll keys, if necessary.
Loopback: DTLB
Prt1 Prt2
F1
Test Started appears on Line 2. If a Data Terminal loopback is already in
progress, the Already Active message appears. If an invalid combination
of loopbacks is in progress, the error message Invld Test Combo appears
(see Table 4-8 for valid loopback test combinations).
The Abort Loopback command stops all loopback tests or any selected loopback
test currently active on the DSU/CSU.
Procedure
To abort one or more loopback tests:
1. From the top-level menu screen, select Test.
2. From the Test screen, select Lpbk.
Test:
Rlpbk Lpbk
F1
3. From the Loopback screen, select Abort.
Loopback:
Abort LLB
F1
March 1999
DTLB
F2 F3
Prt3
F2 F3
Ptrns
F3
F2
PLB
F2 F3
Maintenance
4-29