Paradyne 3160 Operator's Manual page 154

Configuration Options
Channel Configuration Options
C-10
Table C-3. Network Interface Configuration Options (3 of 3)
Circuit Ident:
Next Edit Clear Prev
Network Circuit Identifier. Specifies the transmission vendor's circuit identifier for the
purpose of facilitating troubleshooting. The network circuit identifier is an ASCII text
string that may be up to 255 characters in length.
Edit – Allows you to edit and/or display the network circuit identifier using the generic
text string entry screen.
Clear – Allows you to clear the network circuit identifier. The network circuit identifier is
set to a null string.
The Channel configuration options are divided into two tables as follows:
H
DTE Channel Configuration Options
H
Data Port Channel Configuration Options
NOTE:
Tables C-4 and C-5 describe the DTE channel and data port channel
configuration options. The configuration options in
the DTE Drop/Insert (DSX-1) port is enabled and you are using a 2-port or
4-port DSU/CSU.
March 1999
(Table C-4)
(Table C-5)
Table C-4 only appear if
3160-A2-GB21-80