Lamp Test
Starting a Lamp Test
"
3160-A2-GB21-80
5. From the Abort screen, press the Function key that corresponds to the
network or port for which you want to abort a test pattern. Use the scroll keys,
if necessary.
Abort: Send or Mon
NET
Prt1
F1
The DSU/CSU terminates the selected test pattern and displays the message
Command Complete.
Use the Lamp Test commands to start and stop a test of the DSU/CSU front
panel LCD and LEDs.
Procedure
To start a Lamp test:
1. From the top-level menu screen, select Test.
2. From the Test screen, press the
the screen.
3. From the Test screen, select Lamp.
Test:
Lpbk
Ptrns
F1
4. From the Lamp Test screen, select Start.
Lamp Test:
Abort
Start
F1
March 1999
Prt2
F2
F3
key until the Lamp selection appears on
Lamp
F2
F3
F3
F2
Maintenance
4-35