H Acquiring/Releasing The User Interface - Paradyne 3160 Operator's Manual

"
Acquiring/Releasing the User Interface
3160-A2-GB21-80
Procedure
To enter a password:
1. Use the and
You must enter a character before the
space to the right. The
Passwd: xxxxxxxx
Up Down
F1
2. Enter the required password. Press F1 (Up) and F2 (Down) to scroll up and
down through the valid characters/numbers for the password. You have five
minutes to enter the correct password before the DSU/CSU ends the
session.
3. Press F3 (Done) to indicate you are done entering the password. If you enter
an invalid password, the message Invalid Password appears.
You can access the user interface from either the front panel, the COM port, the
MODEM port (for standalone DSU/CSUs), or the SDCP (for carrier-mounted
DSU/CSUs). The DSU/CSU allows only one user interface to be active at a time.
The front panel is the default user interface at power-up or after a reset. It is also
the default during a software download or when a failure occurs at either the local
or remote PC interface.
You can switch an inactive user interface to active if:
H
The current active user interface has had no activity (no key was pressed) for
at least five minutes.
H
The active user interface has been released with the Release command.
H
The active interface connection is broken. This includes the call disconnect
for a modem interface or the termination of the front panel emulation program
on a locally-attached PC (if the PC supports DTR) or the termination of the
async terminal interface on a remote or locally attached terminal.
March 1999
keys to position the cursor under the desired character.
key moves the cursor to the next
key is not destructive.
Done
F2 F3
Operation
3-51