Paradyne 3160 Operator's Manual page 120

Maintenance
TERMINAL
EQUIPMENT
(DTE)
4-18
EQPT NET
In Out
Mon Jack: EQPT
LINE
RECEIVER
Mon Jack: EQPT
EQPT NET
Out In
Figure 4-2. Test Jack Block Diagram
Table 4-7. Test Jack Functions
Test Jack Name
NET In
(Network In)
NET Out
(Network Out)
EQPT In
(Equipment In)
EQPT Out
(Equipment Out)
MON In
(Monitor In)
MON Out
(Monitor Out)
March 1999
MON
In
Mon Jack: NET
(Selectable)
INTERNAL
CIRCUITRY
(Selectable)
Mon Jack: NET
MON
Out
Function
A break-in test jack that allows a signal to be inserted toward
the network by external test equipment.
A break-in test jack that interrupts the signal coming from the
network and allows it to be terminated by the external test
equipment.
A break-in test jack that allows a signal to be inserted toward
the terminal equipment (DTE) by external test equipment.
A break-in test jack that interrupts the signal coming from the
terminal equipment (DTE) and allows it to be terminated by
the external test equipment.
A monitor jack that is controlled by the Mon (Monitor) branch
of the menu tree. If it is set to EQPT (the default), this jack
monitors the signal going into the terminal equipment (DTE).
If it is set to NET, this jack monitors the signal going into the
network.
A monitor jack that is controlled by the Mon (Monitor) branch
of the menu tree. If it is set to EQPT (the default), this jack
monitors the signal coming from the terminal equipment
(DTE). If it is set to NET, this jack monitors the signal coming
from the network.
LINE
NETWORK
RECEIVER
496-14875
3160-A2-GB21-80