Paradyne 3160 Operator's Manual page 49

3160-A2-GB21-80
The configuration options are divided into functional groups.
a list of the configuration options and defaults. These groups are:
H
DTE (DSX-1) Interface
H
Port
H
Network Interface
H
Channel
H
General
H
User Interface
H
Alarm
H
General Management
H
Management Trap
The DSU/CSU arrives with two preset factory default configuration settings.
These settings are based on the following:
H
Factory 1 – ESF framing format with B8ZS line coding format for both the
network and the DTE Drop/Insert (DSX-1) interfaces. Data ports are
unassigned.
H
Factory 2 – D4 framing format with AMI line coding format for both the
network and the DTE Drop/Insert (DSX-1) interfaces. Data ports are
unassigned.
If neither of the factory default settings support your network's configuration, you
can customize the configuration options to better suit your application.
Use the Configuration (Cnfig) branch of the front panel menu tree to display or
change DSU/CSU configuration options (see Appendix C,
March 1999
Operation
Appendix C contains
Configuration Options ).
3-15