Setting A Password - Paradyne 3160 Operator's Manual

Setting a Password

"
3160-A2-GB21-80
4. From the Edit screen, press the
the screen.
5. Select User.
Edit:
Chan Gen
F1
6. Press F1 (Next) until the Password configuration option appears.
7. Select port(s) to receive access security (None, Com, Modem, or Both). Use
the scroll keys, if necessary.
Password:None
Next None
F1
In addition to establishing access security on a port (refer to the previous section,
Establishing Access Security on a Port
specify otherwise, the password is null.
Procedure
To set a password:
1. From the top-level menu screen, press the
appears on the screen.
2. Select Ctrl.
3. From the Control screen, press the
appears on the screen.
4. Select Passwd.
Control:
Reset CID
F1
March 1999
key until the User selection appears on
User
F2 F3
Com
F3
F2
) the password itself is set. Unless you
key until the Passwd selection
Passwd
F3
F2
Operation
key until the Ctrl selection
3-49