Paradyne 3160 Operator's Manual page 184

Configuration Options
C-40
Table C-10. Management Trap Configuration Options (3 of 3)
Trap I/F: All
Next NET DTE T1s
Link Trap Interfaces. Specifies which interfaces generate linkUp and linkDown trap
messages. These traps are supported on the T1 interfaces (network and DTE
Drop/Insert) and the synchronous data ports.
NET – Sends trap messages for linkUp and linkDown events occurring on the network
interface.
DTE – Sends trap messages for linkUp and linkDown events occurring on the DTE
Drop/Insert (DSX-1) interface. This selection does not appear if the DTE Drop/Insert
(DSX-1) interface is disabled.
T1s – Sends trap messages for linkUp and linkDown events occurring on the network or
DTE Drop/Insert (DSX-1) interface.
Ports – Sends trap messages for linkUp and linkDown events occurring on the
synchronous data ports.
All – Sends trap messages for linkUp and linkDown events occurring on the network
interface, DTE Drop/Insert (DSX-1) interface, or the synchronous data ports.
NOTE: This configuration option is not available if the Link Trap configuration option
is not configured to generate trap messages for linkUp or linkDown events.
March 1999
Ports All Prev
3160-A2-GB21-80