Display Screen - ZOLL R Series Service Manual

C 2 P
HAPTER RODUCT
Table 2-2. R Series Controls and Indicators (continued)
Control or Indicator
NIBP Button (optional)
Softkeys
Charge Indicator Light
(not shown)

Display Screen

Note:
The front panel includes a color display which shows:
The elapsed time (since the unit was turned on).
•
The ECG trace, selected lead, size, heartbeat indicator, and alarm status.
•
The selected energy, charging status, and delivered energy for defibrillation and
•
synchronized cardioversion.
The output current and stimulus rate for pacing.
•
The measured SpO
•
applicable), and alarm status indicators for SpO
Non-invasive blood pressure (NIBP) readings: diastolic, systolic, and mean, plus alarm
•
status indicators (optional; refer to the option insert Non-Invasive Blood Pressure (NIBP),
part number 9650-0914-01).
The patient's carbon dioxide level, respiration rate and capnogram (if applicable), and alarm
•
status indicators for CO
Dioxide (EtCO
Messages and prompts.
•
Labels above the softkeys (appropriate to the context).
•
Perfusion Performance Indicator and Release Bar (R Series Plus Only).
•
CPR Rate and Depth.
•
Remaining CPR Timer.
•
Figure 2-3 shows the layout of parameter values, waveforms, system data, and softkey labels.
2–6
O
VERVIEW
Description
Allows you to start single, auto, or STAT non-invasive blood pressure
measurements as described in the option insert Non-Invasive Blood
Pressure (part number 9650-0914-01). Your unit has this button only if
you ordered this configuration.
Six unlabeled buttons located directly below the display control different
functions depending on the operating mode of the unit.
Labels for the softkeys appear at the bottom of the display directly
above each softkey to indicate its function.
Located on the apex paddle, this light turns on when the defibrillator is
charged and ready.
The screen content depends on the operational mode and the options installed.
percent saturation, signal strength, plethsymographic trace (if
2
monitoring (optional; refer to the option insert End Tidal Carbon
2
), part number 9650-0915-01).
2
www.zoll.com
monitoring (optional).
2
9650-0904-01 Rev. N