Running Operations In The Background - IBM TS7650G User Manual

workstations on the same system, changes made on another workstation are not
automatically reflected on your workstation. To ensure that you have the most up
to date information, you should periodically refresh the ProtecTIER Manager
Navigation pane and View pane.
Figure 8. ProtecTIER Manager
Select the Refresh navigation pane button to refresh the Navigation pane.
Select the Refresh current view button to refresh the View pane.

Running operations in the background

This topic describes enabling operations to run in the background while you are
running another operation.
You can use the same instance of ProtecTIER Manager to work with multiple
ProtecTIER systems while a specific ProtecTIER Manager operation runs in the
background. You cannot, however, run multiple operations in the same ProtecTIER
system.
For instance, if you are running a Delete library operation, the wizard prompts
you to wait while the system goes offline to run the required operation. That
system will be busy until it completes, thereby not allowing further administration
of other operations.
By selecting Run in background, you return control to the user. If additional
systems are configured in ProtecTIER Manager, those systems are accessible and
can be worked on, even while the required operation is running.
36
IBM TS7650G Deduplication Gateway for ProtecTIER
®
: User's Guide for FSI Systems