IBM TS7650G User Manual page 166

v SNMP in ProtecTIER version 3.1 or later supports threshold monitoring and
v Using an IBM-registered management information base (MIB) file.
146
IBM TS7650G Deduplication Gateway for ProtecTIER
v Cluster
v System
- Hardware error categories include:
v CPU memory module
v Cooling module (fan)
v Internal boot drives
v Ethernet cards
v Power supplies
v RAID card
v RAID battery
v Front end adapter, if VTL enabled
v General server errors
v General network errors
v Ethernet switch, if cluster enabled with SMC switch (TS7650G only)
v Network power switch, if cluster enabled with new network power
switch (TS7650G only)
v Back end adapter (TS7650G only)
v Disk controller (TS7650G only)
v Disk expansion (TS7650G only)
v SAS expander
v SATA hard disk drives
– Warning-level severity includes:
- Replication warnings
- VTL warnings
- Capacity warnings
- RAS warnings
– Information-level severity includes:
- VTL configuration change events
- Replication events
allows the user to specify thresholds for the following system runtime behavior:
– Repository space issues
- Nominal capacity
- Physical capacity
– There are two threshold levels a user can set:
- Information level: a trap is sent when the repository regains free space and
rises about the information level.
- Warning level: a trap is sent when the free space in the repository falls
below the warning level
– Going below the informational threshold issues an SNMP trap only if the
warning threshold has been crossed. This method is to ensure that the user is
not flooded with alerts when the normal operation crosses the low water
mark threshold frequently.
– Capacity thresholds can be set specifying % from the repository or specifying
space (GBs).
®
: User's Guide for FSI Systems