Updating The Protectier 3958 Dd6 Firmware - IBM TS7650G User Manual

5. Select Update Firmware. Type the corresponding number and press <enter>.
6. Select Display Firmware Version for BMC and GEM Components. Type the

Updating the ProtecTIER 3958 DD6 Firmware

Complete this task to update the 3958 DD6 Firmware
About this task
Important: The firmware upgrade process connects to the Baseboard Management
Controller (BMC) to get firmware information. Therefore, it is mandatory to have
the BMC configured with an IP address on the same customer network segment
before continuing with the procedure.
30
IBM TS7650G Deduplication Gateway for ProtecTIER
------------------------------------------------------------------------------
ProtecTIER Service Menu running on rassmx
ProtecTIER Configuration (...)
------------------------------------------------------------------------------
1) Configure ProtecTIER node
2) Recover Configuration for a replaced server
3) Configure enclosure serial number for a replaced enclosure
4) Update Time, Date, Timezone & Timeserver(s)
5) Configure replication (...)
6) IP Network configuration (...)
7) Update Firmware
8) Update the System's name
9) Validate configuration
10) Single node - code upgrade (For Support Use ONLY)
B) Back
E) Exit
------------------------------------------------------------------------------
>>> Your choice?
The Update Firmware (...) screen is displayed:
------------------------------------------------------------------------------
ProtecTIER Service Menu running on rassmx
ProtecTIER Configuration (...)
Update Firmware (...)
------------------------------------------------------------------------------
1) Update Server Firmware
2) Display Firmware Version for BMC and GEM Components
3) Upgrade Firmware Version for BMC and GEM Components
B) Back
E) Exit
------------------------------------------------------------------------------
>>> Your choice?
corresponding number and press <enter>. Wait for the process to complete:
Your choice? 2
Begin Processing Procedure [Jan 31 11:36:18]
Firmware Component : Version
----------------------------------
BMC : 2.0.003C
CPLD : 0.6.0004
BIOS : 0.3.0016
FLASH CONFIG : 0xAD9E52D7
DISRUPTIVE : 0x30E4C1D4
End Processing Procedure Successfully [Jan 31 11:36:18]
®
: User's Guide for FSI Systems