Accessing the Configuration menu
Procedure
1. If it is not already running, launch ProtecTIER Manager and log in to your
system.
2. In the ProtecTIER Manager window, select the Systems Management view.
3. Open the ProtecTIER Manager Configuration menu. From the menu bar at the
top of the ProtecTIER Manager window, click: System > Configuration.
The Configuration menu is displayed with the SNMP Traps option selected
and the Communities window open.
Note: You can complete the menu options in any order. However, for best
results and proper operation of all functions, it is recommended that you start
by configuring SNMP traps in "Configure SNMP Traps" on page 150, and then
complete the remaining tasks in the order in which they are documented.
4. Go on to "Configure SNMP Traps" on page 150.
Entering registration details
Procedure
1. In the Registration window (shown in Figure 36), enter the requested
Company and System Administration information:
Figure 36. Registration
i
Until you have completed all of the fields in the Registration window,
the pop-up reminder displays each time you log in to ProtecTIER Manager. To
dismiss the reminder, click Ignore.
2. When you have finished entering registration information, go on to "Configure
SNMP Traps" on page 150.
149
Chapter 16. Reporting