Physical Space Threshold Alerts Configuration - IBM TS7650G User Manual

10. When you are finished adding and testing SNMP trap destinations, from the
navigation pane, select the Alert Filtering by Severity option.
The Alert Filtering by Severity window opens.
Use the options in this window to specify the severity level(s) which trigger
the generation of an SNMP trap. The filter levels are listed from most severe
(Error) to least severe (Information).
11. Select the checkbox for each severity level for which an SNMP trap report
should be generated and sent.
Note: To send SNMP traps, you must select at least one check box in the Alert
filtering by severity configuration pane. Also, note that the level(s) of
severity selected apply to all SNMP destinations in the Communities list.
12. When you have finished setting the severity levels, click Submit and from the
navigation pane, select the Physical Space Threshold Alerts option.
The Physical Space Threshold Alerts window opens with the Physical space
threshold alerts configuration options disabled.
13. Read the information provided in the Physical Space Threshold Alerts pane
to determine whether you want to set physical space threshold limits.
v If you do not want to set physical threshold limits, leave the checkbox clear
and go on to step 15.
v If you do want to set physical threshold limits, in the Physical space
threshold alerts configuration pane, select the checkbox (as shown in
Figure 37) then go on to step 14
Note: The physical threshold limits specified will apply to all SNMP
destinations in the Communities list.
14. Select the threshold unit type (GB or Percent) and enter the corresponding
values for the lower and upper free space threshold limits in the input fields,
as shown in Figure 37:
Figure 37. Physical space threshold alerts configuration options
15. When you have finished setting the physical threshold limits, click Submit
and from the navigation pane, select the Nominal Space Threshold Alerts
option.
The Nominal space threshold alerts configuration window opens.
16. Read the information provided in the Nominal Space Threshold Alerts pane
to determine whether you want to set nominal threshold limits.
151
Chapter 16. Reporting