Activating Or Deactivating Cifs User Access; Working With Cifs Path Sharing; Creating A Cifs Share On Protectier - IBM TS7650G User Manual

About this task
Note: Changing the User ID affects the user files reading and writing permissions.
To change the user ID of a selected user:
Procedure
1. From the Users Management for Workgroups window, select a user from the
2. Click Yes for Are you sure?. The Change User ID window is displayed.
3. Type the new User ID in the User ID: field.
4. Click Ok and wait for the procedure to complete. The new User ID is
What to do next
Go on to "Activating or deactivating CIFS user access."

Activating or deactivating CIFS user access

Use this task to enable or disable CIFS user permissions to access CIFS shared
paths.
About this task
To enable or disable user permissions:
Procedure
1. From the Users Management for Workgroups window, select a user from the
2. If you click Deactivate, a warning message is displayed that the user will not
What to do next
Go on to "Working with CIFS path sharing."

Working with CIFS path sharing

To enable CIFS access and share data, you must grant a host and a user or group
access to shared directories by creating and configuring a CIFS shared path.
Working with CIFS paths sharing involves tasks such as creating, modifying and
deleting CIFS shares.

Creating a CIFS share on ProtecTIER

About this task
This topic describes how to create a CIFS share.
82
IBM TS7650G Deduplication Gateway for ProtecTIER
Users list and click Change User ID. A warning appears that the reading and
writing permissions of the files will be affected.
displayed next to the name in the Users list.
Users list and click Activate (if the user access is deactivated) or click
Deactivate (if the user access is enabled).
be able to access shared paths. Click Yes at the Are you sure? prompt. The user
name will be displayed with (deactivated) in the Users list.
®
: User's Guide for FSI Systems