IBM TS7650G User Manual page 107

6. Define the Administrator server credentials of the Active Directory:
a. Type a username in the Accounts operator user name: field
b. Assign a password in the Password: field.
7. Define the Active Directory server(s) IP addresses:
a. Type the primary IP server address in the Primary active directory server
address: field.
b. (Optional) Type the secondary IP server address in the Secondary active
directory server address: field.
Click Next. The WINS Servers window is displayed.
Note: If CIFS clients are using NetBIOS, use the WINS Servers window to
map IP addresses to the system (NetBIOS) names. This allows access to
resources by system name, instead of by IP address. Configure additional
computers in your network using the WINS Server to keep track of the names
and IP addresses.
8. (Optional) Select Configure WINS servers and enter the server addresses.
Click Next. The Users Mapping window is displayed.
9. Choose one of the options:
v RID provides a means to use a determined algorithmic mapping scheme to
map User IDs, Group IDs, and SIDs. To do this, the ranges for all domains
must be set. Choose this option if mappings need to be identical across
multiple servers.
v Schema Extension is used only if your Active Directory server uses
RFC2307 or SFU schema extensions for ID mappings.
If you choose RID, go on to 10. If you choose Schema Extension, go on to 12.
10. Click Next. The RID Configuration window is displayed.
11. Use the RID Configuration window to set the range mapping and the trusted
domains:
a. Enter the User ID range in the from: and to: fields.
Note: The value in the from field must be smaller than the value in the to
field.
b. Click Add in the Trusted domains pane to define and add domains and
the respective ID range. Click Ok to add the domain to the list.
Conversely, to remove domains, select the domain from the list and click
Remove.
12. Click Next. The Schema Configuration window is displayed.
13. Use the Schema Configuration window to set the range mapping and the
desired schema:
a. Enter the User ID range in the from: and to: fields.
Note: The value in the from field must be smaller than the value in the to
field.
b. Select the desired schema:
v RFC2307 should be used when the domain to be joined is running on a
Windows 2003 R2 or Windows 2008 operating system.
v SFU should be used when the domain to be joined is running on a
Windows 2000 or Windows 2003 with SP1 operating system.
14. Click Next to preview the Summary report. The parameters defined for the
set authentication are displayed.
87
Chapter 11. About CIFS