Modifyexportpath Command - IBM TS7650G User Manual

Table 23. CreateExportPath command (continued)
Command
Example:
CreateExportPath
►► ./ptcli CreateExportPath --ip 9.148.220.45 --fsName <NAME> --exportName <NAME> --path <path>
Command Specific Options:
--secured <STATUS>
Command Specific Options:
--allowedHosts <IP>
Table 24. ModifyExportPath command
Command
ModifyExportPath Modify an NFS
export
64
IBM TS7650G Deduplication Gateway for ProtecTIER
Explanation
[--uid] <ID>
Explanation
--fsName <NAME>
--exportName <NAME>
®
Command Specific Options
--path <PATH>
[--secured STATUS]
[--uid ID]
[--gid ID]
--allowedHosts
(FIELD=VALUE...)...,(...)
Command Specific Options
[--gid] <ID>
Command Specific Options
Name
: User's Guide for FSI Systems
Export path.
Port security: Allow only
connections from port 1024
and below. The valid values
are Yes and No.
The user ID to use for
anonymous users (when
squash is enabled).
The group ID to use for
anonymous users (when
squash is enabled).
Comma-delimited list of
allowed hosts (without
spaces). Each host is in the
form of a tuple with the
following fields: ip,
permission = r / rw,
mapping = root_squash /
no_root_squash.
Note: Linux users must
add the backslash character
(\) before special characters
such as (,) and *.
Command Specific Options
Explanation
File system name (taken from
"ListFileSystems" output).
Export path name (taken from
"ListExportPaths" output).
►◄