Nominal Space Threshold Alerts Configuration - IBM TS7650G User Manual

17. Select the threshold unit type (GB or Percent) and enter the corresponding
Figure 38. Nominal space threshold alerts configuration
18. When you have finished setting the nominal threshold limits, click Submit.
19. From the navigation pane, select the Backlog Threshold SNMP Alerts option.
20. Read the information provided in the Backlog Threshold SNMP Alerts pane
21. From the Replication Backlog Thresholds pane, select the remote repository
152
IBM TS7650G Deduplication Gateway for ProtecTIER
v If you do not want to set nominal threshold limits, leave the check box
clear and go on to 18.
v If you do want to set nominal threshold limits, in the Nominal space
threshold alerts configuration pane, select the checkbox (as shown in
Figure 38) then go on to step 17.
The nominal threshold limits specified will apply to all SNMP destinations
in the Communities list.
values for the lower and upper free space threshold limits in the input fields,
as shown in Figure 38:
Note: The Backlog Threshold SNMP Alerts option appears on the menu only
if a replication grid has been created on the server. If the Backlog Threshold
SNMP Alerts does not appear in the navigation pane, go on to 30 on page
154.
The Backlog Threshold SNMP Alerts window opens and displays the
replication backlog threshold settings status of the remote repositories, if any
exist.
to determine whether you want to set the replication backlog threshold limits.
v If you do not want to set replication backlog threshold limits, go on to 23
on page 153.
v If you do want to set replication backlog threshold limits, go on to 21.
on which to set the backlog threshold and click Set Threshold. The Set
backlog threshold for repository window is displayed, as shown in Figure 39
on page 153:
®
: User's Guide for FSI Systems