Check And Recover Dialog - IBM TS7650G User Manual

About this task
Attention: The check and recovery process is time-consuming and is to be used
only when you suspect a severe problem. Running the ProtecTIER Manager check
and recovery wizard on top of inconsistent file systems can impair the consistency
of the repository.
Perform the following steps to use ProtecTIER Manager to check for errors:
Procedure
1. Choose System > Check and recover. A confirmation message box is displayed.
2. Click Yes. The ProtecTIER system goes offline and scans itself. The Check and
Figure 48. Check and recover dialog
Results
The Diagnostic results pane displays each element of the ProtecTIER system in one
of the following lists:
v Positive checks - no errors.
v ProtecTIER recoverable errors - has errors that the ProtecTIER system might be
v Support required errors - has errors that cannot be repaired by the ProtecTIER
In the Category subpane, filter the list contents by selecting individual categories.
Categories that contain errors of the type ProtecTIER recoverable errors feature an
empty check box.
178
IBM TS7650G Deduplication Gateway for ProtecTIER
recover dialog is displayed with the results of the scan.
able to repair.
system without the assistance of a trained ProtecTIER specialist.
®
: User's Guide for FSI Systems